Description
Excellent alternative solution to manual pumps, the Sanimarin WC. Comfort meets the requirements of simplicity while enjoying a small footprint. The flushing mechanism is triggered by a two-position switch that allows either flush or grind / pump. The duration of each cycle is controlled by the user, without electronics. For operation with sea water, add a seawater pump (Caution: the pump intensity should be less than 17A).
Use:
1 - RINSE (Add Water) recommended water level: 1/2 bowl
2 - EVACUATE: (Pump out)
3 - RINSE (Add Water) to leave a permanent water seal at the bottom of the bowl
Note 1: For rough water, drain the bowl to avoid spraying (with pump out position)
Note 2: No automatic cycle
- Quiet operation
- Optimized dimensions
- All the integrated system in the foot of the toilet
- Intensity absorbed:
12V (300W) 25A
Available in 24 V (360 W) 15 A on request
- Horizontal evacuation: 30 m
- Lift height: 3 m
- Minimum pressure of the rinsing water: 1.7 bar
- Weight: 19 kg
- Ceramic bowl
Use:
1 - RINSE (Add Water) recommended water level: 1/2 bowl
2 - EVACUATE: (Pump out)
3 - RINSE (Add Water) to leave a permanent water seal at the bottom of the bowl
Note 1: For rough water, drain the bowl to avoid spraying (with pump out position)
Note 2: No automatic cycle
- Quiet operation
- Optimized dimensions
- All the integrated system in the foot of the toilet
- Intensity absorbed:
12V (300W) 25A
Available in 24 V (360 W) 15 A on request
- Horizontal evacuation: 30 m
- Lift height: 3 m
- Minimum pressure of the rinsing water: 1.7 bar
- Weight: 19 kg
- Ceramic bowl
Technical characteristics
| Model | WC Sanimarin 32 Comfort |
|---|---|
| Product Brand | SANIMARIN-SFA |
Spare parts
Spare parts