Description
INTERNATIONAL's Interprotect epoxy primer has anti-corrosive power and just as great a seal. It offers you very fast drying and great ease of use.
This high-performance product protects your surfaces against the risk of corrosion. The substrates to be treated must be prepared beforehand.
The Interprotect epoxy primer is a product which makes it possible to fight against corrosion on the following surfaces: polyester, steel, aluminium, cast iron, lead and rigid wood. It is therefore quite possible to treat most of the surfaces on board your boat with this Interprotect epoxy primer.
This product has a covering power of approximately 8 m2/l. It corresponds to thinner n°7 and is available in gray.
The Interprotect epoxy primer can be overcoated by itself 6 months after the first application. It can also be used as a bond coat over an existing epoxy primer. It can be used in aboveground and submerged areas.
Interprotect is a matt-looking primer, very easy to sand and dries very quickly. It is also very resistant to abrasion. This epoxy primer can be used for the hulls, the propellers, the holds, as well as the interior or the exterior of the cabin.
The Interprotect epoxy primer is easily applied, using a brush or roller depending on your preference. It offers you great protection and waterproofing of all treated surfaces.
It is not recommended to use INTERNATIONAL's Interprotect epoxy primer on an antifouling or on a single-component product.
This high-performance product protects your surfaces against the risk of corrosion. The substrates to be treated must be prepared beforehand.
The Interprotect epoxy primer is a product which makes it possible to fight against corrosion on the following surfaces: polyester, steel, aluminium, cast iron, lead and rigid wood. It is therefore quite possible to treat most of the surfaces on board your boat with this Interprotect epoxy primer.
This product has a covering power of approximately 8 m2/l. It corresponds to thinner n°7 and is available in gray.
The Interprotect epoxy primer can be overcoated by itself 6 months after the first application. It can also be used as a bond coat over an existing epoxy primer. It can be used in aboveground and submerged areas.
Interprotect is a matt-looking primer, very easy to sand and dries very quickly. It is also very resistant to abrasion. This epoxy primer can be used for the hulls, the propellers, the holds, as well as the interior or the exterior of the cabin.
The Interprotect epoxy primer is easily applied, using a brush or roller depending on your preference. It offers you great protection and waterproofing of all treated surfaces.
It is not recommended to use INTERNATIONAL's Interprotect epoxy primer on an antifouling or on a single-component product.
Technical characteristics
| White | |
| Color | Gris |
| Product Brand | International |
| Type | Gris |
| Volume | 750 mL |