Description
The BLUE SEA E Series battery coupler (standard) allows each battery to be used in isolation or together to achieve maximum power. It is best installed on the discharge circuit. Very easy to use, it can handle a maximum continuous current of 350 A and is suitable for a voltage of up to 32 V.
This battery coupler enables you to power up or disconnect your electrical circuit on board your boat. It is useful for choosing which battery to connect to the circuit. It is also possible to connect both batteries at the same time.
The BLUE SEA 350 A battery coupler with battery selector can be placed at the input or output of the batteries. It is compatible with both starter and service batteries. It can also be used with Dual batteries.
The battery coupler can be placed in the battery 1, battery 2, both or off positions. In the event of a battery failure or when using high-current equipment, it may be useful to combine two batteries.
IP66 protection rating.
This battery coupler enables you to power up or disconnect your electrical circuit on board your boat. It is useful for choosing which battery to connect to the circuit. It is also possible to connect both batteries at the same time.
The BLUE SEA 350 A battery coupler with battery selector can be placed at the input or output of the batteries. It is compatible with both starter and service batteries. It can also be used with Dual batteries.
The battery coupler can be placed in the battery 1, battery 2, both or off positions. In the event of a battery failure or when using high-current equipment, it may be useful to combine two batteries.
IP66 protection rating.
Technical characteristics
| Battery switch type | Unipolar |
|---|---|
| Excitation cut-off | Without |
| Height | 98 mm |
| Dimensions | 98 x 98 x 79 mm |
| Current | 350 A |
| Weight | 0.29 kg |
| Maximum current | 600 |
| Width | 98 |
| Model | 9001e |
| Voltage | 32 V |
| Depth | 79 mm |
| Product Brand | Blue Sea |